DuraVision FDV1001T User Manual download pdf (Page 23)

Chapter 5 Reference

5-1. Attaching an Arm

The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use

an arm or stand of EIZO option.

ATTENTION

• When attaching an arm or stand, follow the instructions of their user’s manual.

• When using another manufacturer’s arm or stand, conrm the following in advance and select one conforming to

the VESA standard. Use the M4 × 12 mm screws in use by this monitor.

- Clearance between the screw holes : 100 mm × 100 mm

- Thickness of plate : 2.6 mm

- Strong enough to support weight of the monitor unit (except the stand) and attachments such as cables.

• Connect the cables after attaching an arm or a stand.

• Since the monitor and arm are so heavy, dropping them may result in injury or equipment damage.

• Do not turn the monitor lengthwise.

[Attachment Procedure]

Lay the LCD monitor on a soft cloth spread over on a stable surface with the

panel surface facing down.

Remove the stand.

Prepare a screwdriver. Unscrew the four screws securing the unit and the stand with the



screwdriver.

Attach the monitor to the arm or stand.

Secure the monitor to the arm or stand using the screws specied in the user’s manual of the arm or stand.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 33 34

No comments

DuraVision FDV1001T User Manual Page 23